C3 Powersports

C3 AIR INTAKE KIT YAMAHA YZ450F 2010+ CAIN1722 Your dirt bike’s factory airbox system was designed for hot, dry, dusty air. When riding in snow, your air filter will get wet and freeze, causing a rich fuel mixture, hindering performance and risking engine damage by overfuelling. Enhance...

Airbox Delete Bracket - relocate side panel mount for snowbike intake CPIN1756 On KTM, Husqvarna, and GASGAS bikes, the best way to ensure 100% snow evacuation is to disassemble and remove every piece of the inner airbox (and install a Snowbike Air Intake). But, then how do you re-mount...

C3 POWERSPORTS AIRBOX DELETE BRACKET - RELOCATE SIDE PANEL MOUNT FOR SNOWBIKE INTAKE CPIN1106CPIN1107 On KTM, Husqvarna, and GASGAS bikes, the best way to ensure 100% snow evacuation is to disassemble and remove every piece of the inner airbox (and install a Snowbike Air Intake). But, then how do...

C3 Backcountry Footpegs Check it out - these are purpose-engineered to be the best snowbike pegs, and definitely the ones you're going to want to have on your ride!    •Oversized - platform is ~ 4" x 2.25", aiding comfort and control even with bulky snow boots    •Massive...

C3 Backcountry K-Foot Pegs KTM 2023 Oversized - platform is ~ 4" x 2.25", aiding comfort and control even with bulky snow boots Massive pocket, custom tooth profile, and angled surfaces throughout - there is zero place on these where snow/ice/mud could build up...

C3 Powersports Bar Pad set for C3 Handguards / Top Clamp CABA1420ORG Introducing bar pads purpose-designed for the C3 top clamp system! The protection you need, while maintaining accessory flexibility. Soft and forgiving 20-durometer core, with tough & durable outer skin Maximum possible coverage without impeding the integrated TTO temp gauge (used with thermostats) surface or the switch/gauge...

C3 POWERSPORTS Bar Sleeves Set for Heated Handlebars Retain more heat for your bike and your hands! Check below for details, installation instructions, and more! CABA1670BLK

C3 BOOST HARNESS CABLES (CPJC1151) Finally - jumper cables for all your toys, done right! A must-have for powersports and recreation! Snowbike, snowmobile, motorcycle, ATV, UTV... Great usability and an important just-in-case addition to your backcountry safety gear. Heavy gauge wire and high capacity (200A) components...

C3 Powersports CODY MATECHUK SIGNATURE CenterFlow Engine Coolant Heated Handlebars Introducing Cody Matechuk Signature Model C3 CenterFlow heated handlebars setup! 🔥 Developed by Cody for those with a MX racer background - easier to run Lo or Stock risers (particularly on Yamaha), and better bar roll angle adjustment range. Read...

C3 Dual 10W 2" Light Bar (CPLI1380) The Dual 10W 2" bar is super bright for its size and is the best all-around choice for compact size with powerful light output and broad usable pattern. 20W total consumption All lights are built with industry-recognized...

C3 Engine Coolant Heated Handlebars *KIT DOES NOT COME WITH THERMOSTAT THIS IS NEEDED TO RUN THE HANDLEBARS* We raised the bar - CenterFlow, the clear #1!    •Industry-exclusive INTEGRATED CONTROL - adjust the heat output with the custom flow-control valve mounted directly and conveniently at your cockpit!! You'll...

C3 FACTORY BILLET THERMOSTAT Thermostats the way they were meant to be! Helps with performance, efficiency, and reliability A thermostat is, along with air intake, among the most vital upgrades to make to any snowbike. Why? Well, the short version is that freezing ambient temperatures plus...

C3 POWERSPORTS FACTORY BILLET THERMOSTAT CATH1599 THERMOSTAT OPENING TEMP90°C / 195°F Thermostats the way they were meant to be! Helps with performance, efficiency, and reliability. FAQs and more details below. A thermostat is, along with air intake, among the most vital upgrades to make to...

C3 Forcefield Wrap-Around Handguards (CABA1416) *See C3 Shield Expanders For An Extra 1.5-2.0" Of Protection* Snowbiking really puts handguards through the wringer - hands have to be constantly protected from branches and twigs, bigger impacts in crashes, and the constant freezing wind and spray...

C3 POWERSPORTS INTAKE, BREATHER FILTER 1/2"  CPIN1623 Custom-developed to our exact specifications, this compact breather filter has high-quality filtration element and a robust aluminum & rubber body.Its purpose is to stop snow/ice/dirt/mud from collecting and plugging your breather tube (this can result in pressure buildup and...

C3 Intake, Outerwear Dual Sock CPIN1010 Spare Parts Please read this whole section! - Most C3 parts have their own dedicated webpage, but we wanted to make all parts available to you. This is where to buy odds and ends that are not listed elsewhere,...

C3 POWERSPORTS LIGHT/ACCESSORY WIRING HARNESS + DELAY RELAY2016+ 450/500cc Finally - an easy, safe, reliable, and truly plug-and-play harness that makes equipping your bike with an LED lightbar as simple as setting up a DVD player (or something like that!). Custom built bike-specific for popular 450...

C3 POWERSPORTS LOW +1/2 BAR RISERS Do you snowbike? Rise your bars - night and day difference for handling and comfort! Higher bars help you get your weight further back, and put you in a reactive stance for aggressive riding in varying terrain.We wanted...

C3 Mid Bar Risers (No Top Caps) Do you snowbike? Raise your bars - night and day difference for handling and comfort! Higher bars help you get your weight further back, and put you in a reactive stance for aggressive riding in varying terrain.We...

C3 NXT Engine Skins for Snow Bikes Husqvarna FC/FX/FE/TE/501  CAES1805 Fits: FC/FX 450 2023+FE/TE 501/450 2024+ CAES1802 Fits: FC/FX 450 2016-2022FE/TE 501/450 2017-2023 Fits like a skin! No gap = no room for snow to build up = superbly effective! Introducing C3 NXT ENGINE SKINS!! Better late than...

C3 Panel Switch + TTO For One Piece Clamp By popular demand - a panel for mounting switches, TTO Trail Tech gauges including temp voltmeter and hourmeter, and the stock KTM/Husky hourmeter to the C3 Powersports one-piece top clamps! The best riser + handguard setup around, now continue...

C3 Powersports Booster Pack CPJC1092 Don't get caught without power! Convenience and SAFETY make these a must-have. 12000 MAh "Utility" pack with a NEW rugged-style case has the powers to start gas engines up to 6.0 L 20 or more times. It offers the...

C3 POWERSPORTS FIT KIT FOR C3 BAR RISERS CABA1727 KTM/Husqvarna FC/FX 2023+CABA1521 Yamaha/Honda/Kawasaki To accommodate 2023 KTMs without complicating the Bar Riser kits, the bolts/sleeves/adapter plates/nuts now have their own part number. Also, folks who already own risers but are changing bikes can get...

C3 POWERSPORTS GPS MOUNT PLATE CABA1655 A high-quality billet machined panel for mounting GPS units (and other accessories that use the AMPS bolt pattern standard) to the C3 FORCEFIELD NXT Handguards / top clamps. The best riser + handguard setup around, now compatible with your favourite GPS, further cementing the C3 system as the industry...

C3 Powersports NXT Shield Expanders Set NXT Shield Expanders have arrived!  The coverage you need, finally with the perfect fit and dynamic styling you demand Snow and wind are cold, and twigs and branches can hurt.... So add another layer of defense to the already class-leading FORCEFIELD NXT Handguards with...

C3 POWERSPORTS TOP CAP MOUNTS These rad clamps are INCLUDED with C3 FORCEFIELD Handguards - please visit that webpage for the complete setup, or add this product to your cart only if you want to purchase the one-piece or independent clamp plus the required...

C3 Powersports Pair of Braided Lines, push-to-connect tubing 1/4 CATH1279 Get these durable and reliable lengths of tubing to add another custom touch to your C3 Centerflow Heated Bars, or if you just need a spare set! >>> BLACK is standard and is included with...

C3 Powersports Push-to-connect valves and fittings CPTH1263 Are you here for the updated valve with a custom-engineered proportional ball opening for vastly improved heat output tunability on C3 CenterFlow Coolant Heated Bars? You're in the right place! It's at the top of the dropdown. If you haven't yet,...

C3 Rigid Bar Mount Cones Husqvarna/KTM CABA1439 2023+CABA1435 2016-2022*Sold As A Set Of 4* With these you can replace the rubber cone bushings where your bar mounts attach to the triple clamps. This is helpful if you're feeling a bit of play or slop...

C3 Powersports Silicone Hose Kits  Yamaha YZ450 2014-17 CPEN1301BLU OEM Hose Kits to add style to your ride. Please note that these kits are direct replacements for OEM hose kits. That is to say, they are NOT the same as the hoses included with our thermostat kits,...

C3 Snowbike Air Intake Kit (CAIN17) KTM/Husqvarna Yamaha, Honda, Suzuki Your dirt bike’s factory airbox system was designed for hot, dry, dusty air. When riding in snow, your air filter will get wet and freeze, causing a rich fuel mixture, hindering performance and risking engine damage...

C3 Snowbike Factory Billet Thermostat 90 Degrees C3 Billet Thermostat, KTM, Husky, GasGas 2019-22CATH1348 A thermostat is, along with air intake, among the most vital upgrades to make to any snowbike. Freezing ambient temperatures plus snow exposure keep the engine from properly warming up, which...

C3 Snowbike Wheel Kit, YETI SnowMX,  CAWL1750 MTN.TOP + CAWL1750 and CAMT1743 The best front wheel kit solution out there! Indispensable around the shop, rock-solid enough to take years of abuse including bombing gravel roads in the spring (trust us!). Based on the YETI...

C3 POWERSPORTSStealth Under-Fender Storage Bag 2.0 HD Backcountry safety is important, but you don't want your backpack any fuller than it needs to be... The Stealth under-fender storage bag is your answer! NEW heavy duty design! We took our time to reinforce key areas and...

C3 Powersports Stuck Strap CPSZ1332 Pull smarter, not harder! This strap allows you to pull with improved footing and increased leverage, noticeably reducing the amount of effort you have to expend to get unstuck. Surprisingly simple yet hugely effective - don't leave home without...

C3 POWERSPORTS THERMOSTAT ELEMENT  (CPTH1166 60) (CPTH1168 80) This thermostat element fits all C3 thermostat housings.  They are available in 60, 70, 80 and 90°C.  We recommend and find that 90° C works best in winter application on all four strokes.  Many 2 stroke customers prefer to...

C3 POWERSPORTS TIMBERSLED QDT BASH GUARD CPTS1700 One great part about the Timbersled partnership has been connecting our engineering teams directly to produce the QDT Bash Guard! The QuickDrive belt is wider than the chain was, so mounting this bad boy up will add...

C3 Vortex Snowbike ECU HSQ/KTM/GasGas In our quest for the best, we identified an opportunity to partner our passion to deliver the ultimate snowbike experience with the dyno and engine management expertise of PLX Sport in Quebec to create a superior truly snowbike-specific ECU!The biggest...

C3 POWERSPORTS WATERPROOF ROCKER SWITCH AND LED LIGHTBAR BRACKET ONLY CPLI1208 / CPBA1209 If you already have a light, you can pick up our "universal" bracket or high-quality weather-resistant rocker switch here. Our bracket is purpose designed for the LED lightbars we carry (recommended), so fitment with other brands...

C3 Wheel Kit Subassembly Shaft and Collar (CAWL1083)