Motion Pro

Crank Shaft Puller Tool 08-0631 25 mm and 40 mm face plate adapters ensure the crankshaft is pulled perfectly straight into bearings Precision tool used to install press-in crankshafts in an engine case Time-saving method maintains crankshaft true during installation Universal steel nut adapter...

Husqvarna Multi Tool Kit by Motion Pro 00029997500 The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for the following fittings: 14, 12, 10, 8mm hex sockets 6, 8, 13mm socket Inserts for flat and...

Mini-Pro T-Handle Set (8-10-12-13-14) Compact size for easy access and easy transport Racer set includes a vinyl pouch to keep T-handles handy 08-0340

Motion Pro 44mm Bearing Retainer Tool Versatile design features a 22 mm hex and 3/8" square drive Precision design prevents damage to the retainer ring after peened stakes have been removed by drilling 44 mm, to remove and replace the rear wheel bearing/seal retainer...

Motion Pro 46/50mm Fork Cap Wrench For removing the caps on Showa MX Forks One end is 46mm, the other is 50mm Can be used for removal of the compression stack CNC machined for precise fit and tolerance 6061 aluminum material is non-marring on...

Motion Pro 49mm Fork Cap Wrench 49 mm, 8 point box wrench for removing the fork cap (cartridge) on dual chamber closed cartridge forks on late-model Yamaha’s & Honda's 12 mm slot for holding the damper rod for removing the rebound bolt. This allows...

Motion Pro 50mm Fork Cap Wrench 50 mm, 6 point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM’s 12 mm slot for holding the damper rod for removing...

Motion Pro Chain Breaker and Riveting Tool - 08-0058 Will break chains from #35 to #630, for chain sizes #520 or larger it is recommended to first grind the rivet head Includes three pin sizes to fit most chains (2 mm, 3 mm, 4...

Motion Pro Chain Brush Double ended brush for cleaning chains and other components Three sided brush to clean chain rollers and side plates in one operation Long straight bristles on opposite end to clean hard to reach areas Durable nylon brush and high quality...

Motion Pro Chain Tensioner Hardware Kit 33-1500 Kit contains the following class 8.8 hardware: two each M8x50 bolts with 10 mm hex head and two each M8 flange nuts with 12 mm hex head Replacement chain tensioner hardware for most stock applications of street...

Motion Pro Compact Chain Breaker Original Motion Pro design Fits 420 to 530 chain Will push link pin completely through link / side plate Handle folds away for easy storage Durable drive pin is heat treated for strength and wear resistance Will not work...

Motion Pro Ergo Spoke Wrench Unique combination wrench design is 3-sided Open end and semi-closed end Use open end for quick adjustment of spoke nipples and semi-closed end for those hard to turn nipples that require more torque Specially designed ergonomic handle allows larger...

Motion Pro Flywheel Puller M26 x 1.0 R.H. Internal Thread - 08-0293 4-Stroke RH Laser etched with Motion Pro logo and part number Used for removal of flywheel or rotor if applicable Heat treated for strength and durability Premium quality high carbon steel Durable...

Motion Pro Fork Cap Tool  Pre-2019 models 08-0290 Versatile design features a 22 mm hex and 3/8" square drive. This tool allows removal and replacement of the accessory fork cap KTM part# 48600074S CR SEAL RETAINER The tool is slotted to allow removal and...

Motion Pro Fork Seal Bullet Tools Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation Eliminates the need to wrap the fork tube with tape Fitment size is marked on each bullet for easy identification

Motion Pro Heavy-Duty Spring Hook Used to remove exhaust pipe springs, seat or tank holding springs, cotter pins, sidestand springs and other parts

Motion Pro Hex Axle Tool 08-0397 *This is a special order item only. Please CONTACT US to see availability* Fits internal axle hex on many late model sportbikes and some dirt bikes Four metric hex sizes: 17, 19, 22 and 24mm 3/8" square drive on both...

Motion Pro LITELOC RIM LOCK 1.6"(11-0058) Features: One piece molded design made from proprietary high-strength nylon composite Super light and impact resistant Includes the new Motion Pro aluminum LiteLoc™ rim locknut and beveled washer 2.15 weighs only 68 grams (2.4 oz), 1.60 weighs only...

Motion Pro Master Link Pliers *This is a special order item only. * Designed to simplify installation and removal of clip-type master links One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip...

Motion Pro Metric T-Handle Set Durable nickel pewter finish Deep 6-point sockets Includes a vinyl storage pouch Lifetime limited warranty 4 piece: 8mm, 10mm, 12mm, 14mm 6 piece: 8mm, 10mm, 12mm, 14mm, 17mm, 19mm (recommended for Japanese bike owners) 7 piece: 8mm, 10mm, 12mm, 13mm,...

Motion Pro Micro Bleeders New ultra-compact, low profile design is only 11mm high installed Stainless steel body is stronger and will not corrode Easy to install, simply replace the OEM bleeder screw with the Micro Bleeder Reduces harshness caused by air build-up Allows bleeding...

Motion Pro Mini Bleeder Combines wrench and bleeder valve into one convenient and compact tool Bleeds brake systems and hydraulic clutch systems Internal check valve for fast easy bleeding Anodized billet aluminum handle with chromoly steel body Compact size for tight spaces High quality...

Motion Pro Mini Spring Hook Compact size for easy access Ergonomic handle provides a secure grip at every angle For use on exhaust pipe springs, seat or tank holding springs, cotter pins, side stand springs and more 08-0549

Motion Pro PBR Chain Tool 08-0470 Innovative design will Press, Break & Rivet 520, 525, & 530 chains with one convenient tool Versatile design will remove chain pins, press master-link plates and rivet hollow nose & soft nose (quad stake) master link pins on...

Motion Pro Racer T-Handle Set (8mm, 10mm, 12mm, 14mm) Set includes the most popular size T-Handles 8mm, 10mm, 12mm, and 14mm T-handle sockets Durable nickel pewter finish Includes a vinyl storage pouch Lifetime Limited Warranty on T-Handle sockets

Motion Pro Ratchet Spark Plug Wrench Designed to fit in limited space on many water-cooled 2-stroke engines Ratchet mechanism works one way, turn over to reverse Fits standard 13/16 inch plugs 08-0147

Motion Pro Ringer Fork Seal Driver Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use No more worrying about...

Motion Pro Sag Scale 2 New and improved version of the original Motion Pro Folding Sag Scale Can be used to check front or rear sag New swing out design is compact and fits in most tool boxes Adjustable zero set point for direct...

Motion Pro Sealmate Fork Seal Cleaner Easy way to keep your fork seals clean and debris free Extracts dirt and debris trapped between fork seal and tube Will work on conventional and upside down forks

Motion Pro Slack Setter Tool 08-0674 Accurately and quickly measures chain slack Two scales measure both chain slack and chain to swingarm clearance in millimeters Setting chain slack properly dramatically improves chain life Light weight compact design fits easily in your tool box or...

Motion Pro Sprocket Bolt and Nut Fastening Kit Kit includes 6 sprocket bolts (8mm), 6 Fuji metal-locking nuts (8mm) and 6 flat washers (8mm) Pre-applied thread locking agent on sprocket bolts and factory-style Fuji lock nuts create a double locking design that keeps the...

Motion Pro Tire Iron Spoon Type Tool Set of 2 08-0409 Curved end fits securely in the hand Hard nickel pewter finish Each lever is 10 inches long and weighs 7.1 ounces Width at spoon is 25 mm Includes a handy vinyl carrying pouch...

Motion Pro Titan Throttle Tube - 01-1298 Features: Tube is designed to work with OEM removable reels and OEM housing OEM reels not included Fits REV3™ throttle housing and reels Designed for the rigorous demands of motocross Tougher and more resilient than aluminum tubes...

Motion Pro Titan Throttle Tube-Kawa/Suz/Yam 01-1186 Designed for the rigorous demands of motocross Tougher and more resilient than aluminum tubes Will not deform and seize upon a hard impact like aluminum tubes can No more DNFs due to bent or broken throttle tubes Proprietary...

Motion Pro Valve Core Remover Allows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader valve) Perfect tool pack accessory 08-0183

Motion Pro Wheel Rim Lock 1.60/1.40  Recommended for use on all off-road machines and any application using low tire pressure Molded rubber flap to protect against abrasion of inner tube Ribbed alloy contact surface locks tire securely to rim Die-cast aluminum body Fits: Husqvarna TX...

Motion Pro WP Compression Bolt Removal Tool Fits 2007 through 2017 KTM models with WP 4860 MXMA CC forks For removing and installing the compression valve assembly from the fork cap Also works for installation and removal of compression unit on RH fork on...

Motion Pro WP Fork Cap Socket Fits 2014 KTM XC models and all 2013-2014 Husaberg with WP 4860 4CS forks For removing and installing LH and RH adjustable fork caps Allows you to properly torque the fork cap assemblies during installation 19 mm hex...

SealMate Fork Seal Cleaner (Card of 12) 08-0356