WP Suspension

901/790/890 WP Factory Triple Clamp 22101999088C1A INSPIRED BY FACTORY RACING CNC milled aluminum triple clamp Elegant anodised surface Visual highlight Lighter than the standard triple clamp Weight savings: 320 grams COLOUR black SURFACE Anodized OFFSET 30 mm MATERIAL: Aluminium Fits: Husqvarna Norden 901 2022-2023Norden...

MAIN SPRING (59) 162-195 DAMPER, WHITE 91010428

MAINSPRING (38.2) 8.5-350 SET FORK 95010101S

SHOCK BOTTOM PART KTM 790 ADV R 19 46181327S1

SPOKE TORQUE WRENCH A46019909000 On this spoke wrench, the torque is preset at 6 Nm. This prevents over-tightening of the spoke nipples. Too much torque when tightening the spoke nipples is the most frequent cause of broken spokes. Wrench size 6.8 mm.

SPRING SEAT 28X44.5X18.5 CMPL. ZG10022

WP 2021 85CC XACT PRO OUTER FORK TUBE  S53432000000001 Genuine OEM Husqvarna/KTM/GasGas Part Fits: KTM 85 SX/TC 21

WP 2021+ AER Single Spring Conversion -Husqvarna TC/FC 0251L101U400220 **SEE BELOW FOR SPRING RATE CHART. Springs Sold Separately.** During the development of the WP AER 48, WP benchmarked the AER system with conventional systems, which use spiral springs. Both systems showed different advantages, which...

WP AER FORK 2017-2023 TC 65 / 65 SX SVCWP-17 DSS WP 35MM INVERTED FORK SEALED VOLUME CARTRIDGE SYSTEM Genuine OEM Husqvarna/KTM/GasGas/WP Dealer Contact for more information Fits: HusqvarnaTC 65 2017-2023KTM65 SX 2017-2023

WP 401 LOWERING KIT -25mm 25 mm lower seat height No restrictions on riding dynamics Developed together with the vehicle 28112955044 Fits: Svart/Vitpilen 401 2020-21

WP 420MM KTM Fork Springs (2017-2023) To be used with low suspension kit 79612955544 4.0N - 91410140 2" LOWERING ONLY 4.2N - 91410141 2" LOWERING ONLY 4.4N - 914101324.6N - 914101334.8N - 91410134

WP 43mm Fork Repair Kit "Freeride" R511T Genuine OEM Husqvarna/KTM/GasGas Parts

WP 4CS Fork Repair Kit RP10047T Original WP Repair Kit for 4CS Fork The repair kit for the WP 48 4CS fork includes all essential seals for the cartridge, as well as oil seals, dust scraper, and guide bushes. Our recommendation is to always...

WP Adjuster kit 2023+ TC/TX/FC 2025+ TE/FE  00010000413 Product Information: CNC milled from high-strength aluminum Elegant anodised surface Visual highlight Robust, solid construction Colour black red Surface Anodized Material: Aluminium

WP Adjuster Kit Screw Cap w/ Bleed Screws  RP10021T WP OEM number: RP0021 (was replaced by RP10021T) Genuine OEM Husqvarna/KTM/GasGas Parts  

WP AER AXLE CLAMP LEFT D48MM 33MM NATURAL 2021+ 48602045 Genuine OEM Husqvarma/GasGas/WP Parts Fits: Husqvarna TX 300 2021-2024FX 350 2021FX 450 2021TC 250 2024FC 250 2021-2024FC 350 2021-2024FC 450 2021-2024

WP AER AXLE CLAMP LEFT W/TUBE  2021+ 48602045S2 Genuine OEM Husqvarma/GasGas/WP Parts Fits: Husqvarna TX 300 2021-2024FX 350 2021FX 450 2021TC 250 2024FC 250 2021-2024FC 350 2021-2024FC 450 2021-2024

WP AER Axle Clamps TC/FC/SX-F 2016-2020 48601407 Left48601408 Right Genuine OEM Husqvarna/KTM/GasGas/WP Parts Fits most:HSQ/KTM/GG 125-450 Models 2016-2020 FC 450 2020FC 350 2020FC 250 2020TC 125 2020TC 250 2020

WP AIRSIDE CARTRIDGE-TUBE 34X562 KTM 2020-21 48601456S Genuine OEM Husqvarna/GasGas/KTM Part Fits: KTM250 SX-F 2020350 SX-F 2020250 SX 2020250 XC-F 2020350 XC-F 2020450 SX-F 2020250/300 XC 2020125/150 SX 2020450 XC-F 2020 GASGASEX 250/300 2021EX 250F 2021MC 250F 2021MC 125 2021MC 250 2022MC 350F 2022EX 450F...

WP AIRSIDE CARTRIDGE-TUBE 34X562 KTM 2021 48601456S4 Genuine OEM Husqvarna/GasGas/KTM Part MONOSHOCK PDS 125 EXC 15 <2015>MONOSHOCK 5018 PDS 250/300 14 <2014> Fits: KTMSMR 450 2021250 SX-F 2021250 SX 2021250 XC-F 2021450 SX-F 2021250/300 XC 2021125/150 SX 2021 GASGASEX 250/300 2021MC 250F 2021MC 125 2021MC...

WP AXLE CLAMP 48601932 Genuine OEM Husqvarna/KTM/GasGas/WP Parts  

WP AXLE CLAMP RIGHT D48MM 33MM NATURAL 48602046 Genuine OEM Husqvarna/KTM/GasGas Parts

WP AXLE CLAMP WITH INNER TUBE 1090/1190/1290 2014-2020 48601304S1 Genuine OEM Husqvarna/KTM/GasGas Parts Fits: KTM1290 Super Adventure R 2017-20201090 Advenue R 2017-191190 Advenue R 2014-16

WP AXLECLAMP OC LEFT CPL. WITH TUBE 48601932S1 Genuine OEM Husqvarna/KTM/GasGas/WP Parts

WP BIKE STAND 125cc-501 79129955000BJCRobust, solid constructionModern and simple designEasy to mountNew bike stand generationPlastic - aluminum combined for highest stiffnessExtremely stable due to a broad stand designTop plate in 2k injection molding technologySide plates for graphics mountingUse either the supplied, or your own...

WP Bladder PDS 100mm  50181234 Contact for fitment

WP BRAKE LINE, FRONT BRAKE 901/790 RALLY 63542203000 14182S10SET Fits: Husqvarna Norden 901 2022+

WP CARTRIDGE-TUBE 34X552 TC/FC 2021 48602149S Genuine OEM Husqvarna/GasGas/WP Parts Fits: Husqvarna TC 125/150 2021TC 250 2021FC 250 2021FC 450 2021 KTM350 EXC-F

WP COMBINATION TOOL 00029016100 Recommended tool for removing the screw caps. Fits all closed cartridge forks.

COVER 50X6 H18.5 RED S409120010000FA Genuine OEM Husqvarna/KTM/GasGas/WP Parts

WP DAMPINGSIDE CARTRIDGE-TUBE 34X562 KTM 2020-21 48601535 Genuine OEM Husqvarna/GasGas/KTM Parts Fits: KTM250 SX-F 2020-21350 SX-F 2020250 SX 2020250 XC-F 2020350 XC-F 2020450 SX-F 2020250/300 XC 2020125/150 SX 2020450 XC-F 2020 GASGASEX 250/300 2021EX 250F 2021MC 250F 2021MC 125 2021MC 250 2022MC 350F 2022EX...

WP DIRT SCARPER NOK 18MM BLACK 50180606 Genuine OEM Husqvarna/KTM/GasGas Parts

WP DIRT SCRAPER Resistant to the toughest stresses and strains Mounted directly on the fork Ideal protection for sealing the fork a49001997000 Fits: Full-size Husqvarna/KTM/GasGas 125-501 2012-2024

WP Dirt Scraper 18MM 50180082 Genuine OEM Husqvarna/KTM/GasGas/WP Parts

WP Factory Race Triple Clamp KTM Duke 2018-2023 6410199914430B CNC-machined aluminium triple clamp for pure race feeling Manufactured from high-strength aluminium High quality, black/silver anodised surface finish Stiffer than the standard triple clamp More precise handling in hard braking manoeuvres Less fork wear in...

WP FACTORY RACING REAR WHEEL 2.15X18" BLACK A49010901544C1A Anodised hub milled from a whole piece Maximum gain in handling and, at the same time, stability in challenging off-road situations Anodised aluminum spoke nipples Reinforced spokes for higher impact resistance Special order - Required 4-7...

WP FACTORY RACING FRONT WHEEL 1.6X21" 2023+ Anodized hub milled from a whole piece Maximum gain in handling and, at the same time, stability in challenging off-road situations Anodized aluminum spoke nipples Reinforced spokes for higher impact resistance COLOR black  WHEEL SIZE 21  " A46009901544C1A...

WP FACTORY RACING REAR WHEEL 2.15X19" Anodized hub milled from a whole piece Maximum gain in handling and, at the same time, stability in challenging off-road situations Anodized aluminum spoke nipples Reinforced spokes for higher impact resistance COLOR black  WHEEL SIZE 19  " Husqvarna/KTM/GasGas...

WP FACTORY RACING TRIPLE CLAMP 79701999021C1A Elegant anodised surface Visual highlight CNC milled aluminum triple clamp Optimally tuned steering stem stiffness 100% alignment of the fork tubes Ideal flexibility – precisely customised to the WP fork Specially optimised geometry of the fork clamping No...

WP FACTORY RACING TRIPLE CLAMP 2023+ TE/TC/FC/FX/FE/TX A46001999021C1A Color differences between the upper and lower triple clamp cannot be technically ruled out. CNC milled aluminum triple clamp Elegant anodized surface Visual highlight Optimally tuned steering stem stiffness 100% alignment of the fork tubes Ideal...

WP Factory Start Device // TECHNICAL DESCRIPTION This is how the factory riders start! The factory start ring is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the center of gravity forwards....

WP FACTORY START DEVICE A54001996500FAA Made of high-strength aluminum Elegant anodised surface Pure race feeling Provides more traction when starting Mounted directly on the OEM-fork Two different selectable preloads, without additional effort in mounting Simple mounting of the fork ring due to two part...

WP Factory Start Device 65cc 2021+ 46301996100 Provides more traction when starting Made of high-strength aluminum Elegant anodized surface Pure race feeling Mounted directly on the OEM-fork Fits:Husqvarna TC 65 2021+ GasGasMC 65 2021+ KTM65 SX 2021+

WP Factory Start Device 85cc Xact Pro 7543 Made of high-strength aluminum Elegant anodized surface Pure race feeling Provides more traction when starting Mounted directly on the fork S998020012S0000 Fits: GasGas MC 85 17/14 2021-2024MC 85 19/16 2021-2024HusqvarnaTC 85 17/14 2021-2024TC 85 19/16 2021-2024KTM85...

WP FACTORY STEERING DAMPER 2017-2023 A54012905000FAA Top performance/price ratio Gain in stability at the front wheel Fully adjustable Well thought-out mounting of the damper enables individual handlebar adjustment 00050000929 handle bar support kit required for use on MY16 and on XC from MY16. For use...

WP FACTORY STEERING DAMPER BRACKET 77012005144 For WP FACTORY STEERING DAMPER A54012905000FAA Contact us for more information

Pre-Order: Avalabile ETA April 2024 WP Factory Black Triple Clamp 85 TC/SX/MC 2018+ 47201999014C1A Color differences between the upper and lower triple clamp cannot be technically ruled out. CNC milled aluminum triple clamp Elegant anodized surface Visual highlight Optimally tuned steering stem stiffness 100%...

WP FACTORY TRIPLE CLAMP DUKE 2018-2023 6410199918830B Made of high-strength aluminum Elegant anodised surface Perfect for use on the race track Visual highlight CNC milled aluminum triple clamp Stiffer than the standard triple clamp Lighter than the standard triple clamp More precise handling during hard...

WP FOOTPART M22X1 H38,8 50181214 Genuine OEM WP/Husqvarna/KTM/GasGas Parts

WP Fork Air Pump 79412966100 Indispensable tool for the perfect and individual tuning your air fork. With this high quality pump, extensively tested by Husqvarna, you can set your air fork effectively and perfectly to your needs and the current track conditions, directly on the...