Motorcycle Drive & Transmission

OEM Front Sprocket - Husqvarna/KTM/GasGas OEM front sprocket for full size bikes excluding 690/790/890/901 Make Model Husqvarna All Enduro Models (Full Size)  KTM All Enduro Models (Full Size) GasGas All Enduro Models (Full Size)

Dirt Tricks Ironman Front Sprocket Husqvarna/KTM/GasGas The Dirt Tricks Front Sprocket is built from an ultra-hard tool steel. Most front sprockets sold today are “case hardened”, meaning that only a thin outer layer of steel is hardened. Below that layer is soft steel. Our front sprockets are...

Powerparts 2K Rear Sprocket by Supersprox If you're looking for ultimate quality and performance, this sprocket is the one for you! High-strength steel teeth, give long service life Aluminum inner ring, to reduce unsprung weight Joined together permanently with high-strength rivets At least three...

Dirt Tricks Ironman Rear Sprocket Husqvarna/KTM/GasGas The Dirt Tricks Rear Sprocket was designed and patented by Dirt Tricks president and engineer Greg Burns in 2002, using his knowledge of aerospace steels, heat treatments, as well as FEA stress analysis. Being an expert desert racer, Greg...

Powerparts Steel Rear Sprocket This steel rear sprocket is a OEM replacement for most all KTM/Husqvarna Motorcycles. For longer trips, we recommend this extremely low-wear, QStE 460 steel sprocket. Make Model Years Husqvarna All Models 125-501 2014+ Husqvarna Enduro/Supermoto 701 2016+ KTM All Models 125-500...

DID 520 ERT3 Gold Chain 520ERT3X120 The best chain in motocross just got better, the D.I.D. ERT3 chain has been proven by the top teams in the world. With cutting-edge technology and designed for the extreme conditions of racing, the D.I.D. ERT3 has 25%...

DID 520 VT2 X-Ring Chain 78010267118 BFD Hot Pick! This is the grey version of the DID VT2 Gold Chain that has been the choice of all our personal and race bikes at BFD Moto. Narrow X-Ring chain with less weight than the standard...

DID 520 VO O-Ring Chain 520VOX120 Top quality O-ring chains are quad stake riveted with solid bushings for superior strength. Long life. Applicable up to 500cc. Master Link included. 8,000 lbs. average tensile strength. FITMENT: FULL SIZE UNIVERSAL 125-501

Blue XW-Ring Chain 26510965118HA Greater flexibility and better running characteristics Constant and permanent lubrication Better sealing against water and dirt Significantly longer durability

Regina 520 GPXV Chain 50310165118 This non O-ring chain was developed with pure performance in mind. The special construction of the bushings results in the perfect compromise between durability and maximum performance. FITMENT: FULL SIZE HUSQVARNA/GASGAS/KTM MODELS 125-501

RK 520SO Standard O-Ring Chain RK offers the best O-ring chains in the industry. All RK O-ring chains are constructed of hi-carbon alloy steel for strength and durability. RK utilizes Nitrite Butadiene O-rings to seal in lubrication and deliver smooth power with no O-ring...

TM Designworks Chain Guide - Husqvarna The TM Designworks chain guide comes straight from motorsport and offer the following properties: CNC-machined from Teflon With replaceable chain running surface, hence extremely durable Specially designed for the challenges of off-road use Fitment: TX/FX Models: 2017-2022 TC Models:...

Husqvarna Chain Guide (2014-22) 85 2014+ 78104070100H1 Direct replacement for stock chain guide, in factory blue. Fits: Make Model Years Husqvarna TC 85 17/14 19/16 2014+ Husqvarna TC 125/250 2014-2022 Husqvarna FC/FX 250/350/450 2014-2022 Husqvarna TE 150/300 2014-2022 Husqvarna FE 350/450/501 2014-2022   Also fits...

Husqvarna Chain Slider 77204066100H1 Direct replacement for the stock chain slider, in factory blue Make Model Years Husqvarna TC 125 2016-2023 Husqvarna TC 250 2017-2023 Husqvarna FC 2016-2023 Husqvarna TX/FX 2017-2023 Husqvarna TE/FE 2016-2023

Husqvarna Lower Chain Slider 79003053000H1 Direct replacement for the stock lower chain slider, in factory blue Make Model Years Husqvarna TC 125 2016-2022 Husqvarna TC 250 2017-2022 Husqvarna FC 2016-2022 Husqvarna TX/FX 2017-2022 Husqvarna TE/FE 2016-2023

Husqvarna Drivetrain Kit 13/50 -Supersprox SPA113U50MM118A This drive kit consists of a 13 tooth front and a blue 50 tooth rear sprocket wheel, a DID VT2 X-Ring chain and master link. Fitment: 125-501 All Models 2016+ In this kit: Powerparts 2K Rear Sprocket By...

OEM Front Sprocket 50cc -Husqvarna/GasGas/KTM OEM aluminum front sprocket for 50cc bikes. Make Model Years Husqvarna TC 50 2018+ KTM SX 65 2014+ GasGas MC 65 2021+

DID 415 Chain 50cc /EE3/EE5 45110265104 Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability FITMENT: HUSQVARNATC 50EE 3EE5 GasGas MC 50 KTM 50SXE5E3

OEM Front Sprocket 65cc -Husqvarna/GasGas/KTM 420NZ3GBx130RB OEM aluminum front sprocket for 65cc bikes. Make Model Years Husqvarna TC 65 2018+ KTM SX 65 2014+ GasGas MC 65 2021+

420 Chain 65cc Husqvarna/GasGas/KTM  46110165112 Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability

DID 420 NZ3 Super Chain 65cc 420NZ3GBx130RB Features: D.I.D's professional high-performance non O-Ring chain. DHA pin treatment - hard chromium-carbide layer formed on pin surface Far better wear resistance than other chains Up to 19% higher tensile strength Increased anti-oxidation performance Solid bushings, quad-riveted...

RK GB420MXZ Premium Chain (65cc) *This is a special order item only. Please CONTACT US to see availability* A professional series sport chain for pro racing. Anti-stretch chromium pin treatment 10% higher tensile strength Maximum tensile strength: 5,400 lbs. Suitable for 150 cc max offroad Make...

Dirt Tricks Rear Sprocket 65cc The Dirt Tricks Rear Sprocket was designed and patented by Dirt Tricks president and engineer Greg Burns in 2002, using his knowledge of aerospace steels, heat treatments, as well as FEA stress analysis. Being an expert desert racer, Greg became...

OEM Front Sprocket - Husqvarna/KTM/GasGas 85 OEM front sprocket for the mini bikes! Make Model Years Husqvarna TC 85 2014+ KTM SX 85 2007+ GasGas MC 85 2021+

Husqvarna/GasGas/KTM 428 Chain 85cc 47110965124 Specially developed for use in motocross No O- or Z-rings > minimum loss of power and good durability FITMENT: HUSQVARNA/GASGAS/KTM 85CC MODELS

Dirt Tricks Rear Sprocket 85cc The Dirt Tricks Rear Sprocket was designed and patented by Dirt Tricks president and engineer Greg Burns in 2002, using his knowledge of aerospace steels, heat treatments, as well as FEA stress analysis. Being an expert desert racer, Greg became tired...

Dirt Tricks Husqvarna/KTM 690/701 Front Sprocket The Dirt Tricks Front Sprocket is built from an ultra-hard tool steel. Most front sprockets sold today are “case hardened”, meaning that only a thin outer layer of steel is hardened. Below that layer is soft steel. Our front sprockets are...

15T Damped OEM Front Sprocket - Husqvarna/KTM/GasGas 15T Damped OEM Front Sprocket for full size bikes. Make Model Husqvarna All Models (Full Size) KTM All Models (Full Size) GasGas All Models (Full Size)

DID 520 VO O-Ring Chain Connecting Link Connecting link for DID 520 VO O-Ring Chain.

Husqvarna Aluminum Rear Sprocket - 85 *This is a special order item only. Please CONTACT US to see availability* Manufactured from high-strength 7075-T6 aluminum, the strongest aluminum in the world The chain runs smoothly, straight as a die and true, because it's ground level to an...

TM Designs Baja Rally Chain Slider Yamaha Front chain slider is designed for maximum long term wear life for Baja endurance and Europeon Rallye races 100% Oil impegnated for virturally for ZERO friction and chain drag and is designed with a new shape and...

Timbersled Spare Master Link 520 Chain Spare connecting link that comes stock on every Timbersled kit. A must have for riding!

Connecting Link For 520 X-Ring Chain (78010266000) Connecting Link For 520 X-Ring Chain 78010167118

Pro Taper KTM Rear Sprocket Make Model Years KTM 125-550 EXC/MXC/SX/SX-F 1991-2011

Vortex Front Sprocket TTR 230 For more than 15 years, U.S.-based Vortex Racing continues to manufacture, market and sell top-quality motorcycle racing components for Motocross, Supercross, Road Racing, Flat Track Racing and Minibikes. Owned and operated by motorcycle racers and enthusiasts, Vortex focuses on...

TM Designs Front Chain Slider KX 450 TM composite plastic is designed with fiction reducing and UV additives. Can last up to 3 time longer than any other chain slider on the market.Includes sound damping pads bonded to the slider to help reduce chain slap.Updated alloy collars...

TM Designworks Baja Rally Endurance Chain Slider -Beta Front chain slider is designed for maximum long term wear life for Baja endurance and Europeon Rallye races 100% Oil impegnated for virturally for ZERO friction and chain drag and is designed with a new shape...

Sunstar Kawasaki KX85 Steel Rear Sprocket 420-50T STEEL REAR SPROCKET Sunstar is the largest OEM and aftermarket supplier of motorcycle and ARV sprockets in the manufacturing world for every major Japanese motorcycle builder since 1946 Computer-designed weight reduction holes for the best combination of...

Sunstar Kawasaki Front Sprocket Sunstar is the largest OEM and aftermarket supplier of motorcycle and ARV sprockets in the manufacturing world for every major Japanese motorcycle builder since 1946 Computer-designed weight reduction holes for the best combination of lightness, strength and stability Exclusive tooth-valley...

Sunstar Yamaha TTR 125 Rear Sprocket Sunstar standard steel sprockets are long-lasting sprockets designed for exceptional fit and performance. They are constructed from 1045 high carbon steel with an exclusive heat treatment for added strength and durability. These sprockets also receive a special treatment...

RK 420SO Clip Link Clip type connecting link for RK 420SO Standard O-Ring Chain

Renthal Husqvarna/KTM Rear Sprocket CNC-machined from a specially enhanced 7075-T6 aluminum alloy Machined self-cleaning mud grooves at each tooth to help prevent mud buildup and increase wear resistance Ultralight design is 66% lighter than steel, yet incredibly durable 224U-520-48GPSI Make Model Years Husqvarna All...

Renthal Yamaha Front Sprocket CNC-machined from case hardened and core refined 655-M13 nickel chromium steel Machined self-cleaning mud grooves at each tooth to help increase wear resistance Ultralight design has a 10-15% weight savings

Renthal Suzuki Front Sprocket Front sprockets are made from case-hardened nickel chromoly steel Front sprockets feature self-cleaning grooves to clear mud and increase sprocket life

Regina Connecting Link M42 Chain 135ZRP Replacement connecting link

JT Kawasaki Rear Sprocket Made from C49 high carbon steel Heat treated and hand finished to meet or exceed OEM standards Outlasts any mild steel or surface hardened sprocket 54 teeth steel rear sprocket Make Model Years Kawasaki KX 80 1986-2000 Kawasaki KLX 140/L...

JT Yamaha TTR 125 Rear Sprocket JT Sprockets are made from the latest generation of computer design and control metal cutting equipment for maximum durability JT rear sprockets are made from the finest C45 high carbon steel All sprockets are heat-treated and hand-finished to...

JT Honda Rear Sprocket JT Sprockets are made from the latest generation of computer design and control metal cutting equipment for maximum durability JT rear sprockets are made from the finest C45 high carbon steel All sprockets are heat-treated and hand-finished to meet or...

JT Suzuki Rear Sprocket DL/Vstrom 650 Made from C49 high carbon steel Heat treated and hand finished to meet or exceed OEM standards Outlasts any mild steel or surface hardened sprocket 45 teeth steel sprocket Make Model Years Suzuki DL/VSTROM 650 2012-2015

DID 428 VX Pro Street VX Chain 428VXX120FB D.I.D's PRO-Street X-Ring® VX Series Chains are high quality X-Ring® chains with superior strength to withstand the horsepower of today's Dual Sports and Trials Bikes. The VX Series uses our patented low friction X-Ring® for maximum...