Bullet Proof Designs Front Disc Guard - Husqvarna/ KTM/GasGas 22MM Protection for the front brake rotor from rocks and impacts Protects lower fork lug while still allowing fork adjustments to take place through access hole on the bottom of the guard for compression or...

Bullet Proof Designs TPS Sensor Guard - TPI ONLY - upto 2023 Husqvarna/KTM/GasGas  Ultimate Protection for your Throttle Position Sensor on your new TPI bike.  Replace the plastic OEM cover with our Billet Aluminum TPS Guard and you are good to go.  Our Bullet...

Bullet Proof Designs Oil Drain Kit Change the oil in your KTM or Husqvarna dirt bike without removing your skidplate or creating a mess.  Simply lean the bike over on to a stand or against the wall, remove your OEM drain plug from the...

Moto Tassinari VForce 4R Reeds V4R26 The unique design of the VForce reed valve system features double the reed tip surface over a conventional reed valve design. This has two major benefits: 1) The reed petals only travel half the distance as a conventional...

Thermo-Bob 4 Snow Bike Thermostat - Husqvarna/KTM 250/350 When these bikes are used as a snow bike, the lack of factory cooling system control leads to cold coolant temps.  The EFI sees cold coolant and overfuels, thinking the bike is constantly in 'warm-up' mode. ...

SXS Slide Plate FC/FX/FE 450/501 The SXSlide Plate was designed out of 1/4″UHMW plastic to protect your bike from tip to tail.  This lightweight yet extremely durable material  replaces bulky aluminum skid plates and has our linkage guard built in. Slide over offroad obstacles,...

**Comes without stickers, all Black** AXP Racing Xtreme Skid Plate - KTM 790/890 Adventure 2019-2023 AX1543 (Black)AX1560 (Orange) AXP Racing's Poly Skid Plate for the KTM 790 Adventure features a tough, thick 8mm poly plate that's designed to protect your Engine, Fuel Tanks &...

AXP Racing PHD Skid Plate - KTM (AX1359) SXF/XCF 250/350 (16-18) AXP skid plate provide an optimal protection to your frame and cases Does not generate any vibrations and is able to absorb heavy duty impacts Better length of life compared to alloy and carbon skid...

AXP Racing PHD Skid Plate - Husqvarna, KTM, GASGAS (2017-2024) AXP skid plate provide an optimal protection to your frame and cases Does not generate any vibrations and is able to absorb heavy duty impacts Better length of life compared to alloy and carbon skid plates...

WP Suspension 50cc Lowering Kit 45412955044S // TECHNICAL DESCRIPTION The low suspension kits specially developed in collaboration with WP are the perfect compromise between maximum chassis performance and minimum possible seat height. Just like the standard parts, the components used here are manufactured from...

Powerparts Factory Radiator Kit 79135910044 *This is a special order item only. Please CONTACT US to see availability* The special factory radiators have a larger surface area for more efficient cooling. They also contain special coolant hoses and radiator protectors to improve engine cooling. Make Model...

WP XACT Pro/ Cone Valve 485mm Fork Springs *Spring rates can vary per bike. Contact us if you have any additional questions* WP Original fork springs are high-performance springs and can be used to replace your original spring or to fine-tune your fork to your own weight...

Alpinestars Tech 7 Boots The revolutionized Tech 7 MX boot incorporates innovative materials and technology in a completely new design for a lighter, more anatomically profiled performer. This CE certified boot promotes core stability and flex via a biomechanical pivot while offering excellent ankle...

OEM Power Valve Springs - Husqvarna/KTM/GasGas Adjust the power characteristic of your 250/300 two stroke with the optional power valve springs. Make Model Years Husqvarna TC 250 2014-2022 Husqvarna TX 300 2017-2019 Husqvarna TE 250/300 2014-2019 KTM SX 250 2007-2022 KTM XC/XCW 2007-2019 Husaberg...

OEM Exhaust Pipe O-Rings - Husqvarna/KTM/GasGas O-RING 44,00X3,00 VITON (0770440030) x 2 Exhaust pipe o-rings for KTM/ Husqvarna/ Husaberg/ Beta two strokes Sold in pairs

OEM Countershaft Repair Kit - 2 Stroke Husqvarna/KTM/GasGas Includes oil seal, o-ring, spacer sleeve

SKF Dual Compound Fork Seals - WP Note: Each kit includes 1 oil seal and 1 dust seal Order 2 Packs if doing both forks Completely redesigned featuring exciting new technology adding to SKF, well established fork seal products introduced over 10 years ago, consists of two newly developed...

Motion Pro Hex Axle Tool 08-0397 *This is a special order item only. Please CONTACT US to see availability* Fits internal axle hex on many late model sportbikes and some dirt bikes Four metric hex sizes: 17, 19, 22 and 24mm 3/8" square drive on both...

Motion Pro Compact Chain Breaker Original Motion Pro design Fits 420 to 530 chain Will push link pin completely through link / side plate Handle folds away for easy storage Durable drive pin is heat treated for strength and wear resistance Will not work...

Motion Pro Fork Cap Tool  Pre-2019 models 08-0290 Versatile design features a 22 mm hex and 3/8" square drive. This tool allows removal and replacement of the accessory fork cap KTM part# 48600074S CR SEAL RETAINER The tool is slotted to allow removal and...

Enduro Engineering Handlebar Riser Kit - Solid Mount Simply raise your handlebars from 5-30mm. Interlocking 6061 aluminum CNC machined pieces. All hardware included. Make Model Years Husqvarna TC 125 2014-2015 Husqvarna TC 250 2014-2016 Husqvarna FC 2014-2015 Husqvarna TE/FE 2014+ KTM SX 125/150 2007-2015...

Acerbis X-Grip Frame Protector - Husqvarna Protects the frame in the maximum friction area Use of rubber to increase grip and therefore control of the motorcycle Easy assembly and dismantling with expander and plastic bands 2733451035 Fits: Make Model Years Gas Gas EC 250...

Regina 520 GPXV Chain 50310165118 This non O-ring chain was developed with pure performance in mind. The special construction of the bushings results in the perfect compromise between durability and maximum performance. FITMENT: FULL SIZE HUSQVARNA/GASGAS/KTM MODELS 125-501

Heated Grip Kit - 701 / 700 / 790 Warm hands, no matter what the weather Grip temperature adjustable in 4 steps High vibration absorption Safe and comfortable grip Maximum wear resistance and durability Raised keys for use with gloved hands Waterproof switchFits: Make...

Husqvarna Lever Protection - Vitpilen/Svartpilen 701 *This is a special order item only. Please CONTACT US to see availability* Protection of the lever in case of unintentional ground contact No unintentional operation of the lever if contact is made with another rider/vehicle Easy exchange for the...

Husqvarna Slide Pad Kit - Vitpilen/Svartpilen 701 *This is a special order item only. Please CONTACT US to see availability* Protects from damage in the event of a fall Easy to mount Protects the swingarm Make Model Years Husqvarna Vitpilen/Svartpilen 701 2018+

Husqvarna Front Slide Pad Kit - Svartpilen/Vitpilen 701 *This is a special order item only. Please CONTACT US to see availability* Protects from damage in the event of a fall Easy to mount Protects the fork Make Model Years Husqvarna Vitpilen 701 2018+ Husqvarna Svartpilen 701...

Camel ADV 1 Finger Clutch - KTM 790/890 Norden 901 We love the new Norden 901 and KTM 790 Adventure off-road but found the clutch friction zone to be narrower than we'd like. To help smooth out the toggle switch-like clutch feel, we designed a...

Camel ADV Shock Heat Shield - 901/890/790 Matte Black 2019-2023 Models CADV-790-02-BLK Matte Black 2024-up Models CADV-790-01-HS Keep the heat out of your 790/890/901 KTM/Husqvarna shock with our heat shield. A cooler shock improves your suspension performance and extends service intervals. To meet Euro 5 emissions, KTM...

Nuetech NitroMousse Tire Insert Standard Standard Mousse: 10-12 PSI We have put more than a decade of research and development into improving the less than desirable aspects of a mousse. In general mousses are known to be a compromise in performance on some level,...

Nuetech NitroMousse Tire Insert Soft Soft Mousse: 6-8 PSI We have put more than a decade of research and development into improving the less than desirable aspects of a mousse. In general mousses are known to be a compromise in performance on some level, but Nitromousse...

AKT Fat Straps 63 MM Peg E / L-Track AKT FAT STRAPS BLACK 63MM PEG SIZE E/L-TRACK (SET OF 2) Finally - straps made specifically for dirtbikes No more crushing your front forks Currently fits all stock footpegs of top brand dirtbikes Easily adaptable...

Husqvarna Impact Short 3DF 5.0 by Leatt Tight-fitting protective shorts Breathable, finely ventilated PE fabric Headband with adhesive silicone strips Close-fitting design for wearing under clothing Elastic, comfort waistband Exclusively for Husqvarna Motorcycles by LEATT 54 % polyurethane / 18 % EVA / 14...

Powerparts USB Power Outlet Kit 93011942044 Easily accessible Mounting material included Includes protective cover Output coltage 5V/1,000 mA Power supply for the navigation system or any other use   Fits: Make Model Years Husqvarna Enduro/Supermoto 701 2016+ Husqvarna Svartpilen 401/701 2018+

Husqvarna 701 Style Graphics Kit *This is a special order item only. Please CONTACT US to see availability* Made of the highest quality materials Visual highlight Perfect fit Personalize the look of your motorcycle Designed to completely change the original look of your motorcycle Glue the...

RAM Ball Stud Base Threaded Base for 10mm x 1.25 thread pitch. Compatible with all Honda, Kawasaki, KTM, Triumph, Husqvarna, Zero and Suzuki bikes, and left side of Yamaha.

RAM BMW Ball Stud Base Ball Stud Base & Adapter with 10mm x 1.5 threads Fits F650/800 twins and R1200GS.

RAM Reverse Thread Adapter (DT-REV) Right hand mirrors on Yamahas, certain Betas, and certain KTM bikes may require a reverse thread adapter. Some models (WR250s) are factory equipped with a reverse thread adapter. Please verify if your specific bike is equipped with the reverse thread adapter on the...

Husqvarna Air Filter Box Cover - 14-16 77206998000H1 *This is a special order item only. Please CONTACT US to see availability* Highly recommended! Protects the intake tract from water and dirt when cleaning the air filter box. Make Model Years Husqvarna TC 125 2014-2015 Husqvarna TC...

Husqvarna Air Filter Box Cover - TC 65 *This is a special order item only. Please CONTACT US to see availability* Highly recommended! Protects the intake tract from water and dirt when cleaning the air filter box. Make Model Years Husqvarna TC 65 2017+

Twin Air Air Filter - Husqvarna/KTM (11-16) The Twin Air-Air Filter is designed with high quality materials and superior construction that delivers unbeatable performance and protection and will make the Twin Air- Air Filter the hands down choice of more world & national champions...

Twin Air Pre-Oiled Air Filter -Husqvarna/KTM/GasGas 2017-2022 *Please see fitment chart below as this filter will only fit 2023 TE/FE Models, not TC/TX/FX/FC* The Twin Air-Air Filter is designed with high quality materials and superior construction that delivers unbeatable performance and protection and will...

Timbersled TSS Air Intake What's included: (2207146) FILTER-PRE AIR INTAKE TSS (2207147) HOSE-AIR FILTER BASE TSS (2207148) COUPLER-AIR TSS

Alpinestars Bionic Action Chest Protector An ultra-lightweight protective system off¬ering excellent upper body protection against impacts, this protector features an all-new chest protector complete with Cell Technology for ultra-light weight and optimum ventilation. The back protector is also new and boasts a softer formulation...

Alpinestars MTB SX-1 V2 Knee Protector Great for Electric Bicycles The SX-1 v2 Knee Protector helps reduce the risk and severity of a knee injury by preventing hypertension of the knee in the event of an accident. This lightweight yet strong protector features a...

C3 Snowbike Air Intake Kit (CAIN17) KTM/Husqvarna Yamaha, Honda, Suzuki Your dirt bike’s factory airbox system was designed for hot, dry, dusty air. When riding in snow, your air filter will get wet and freeze, causing a rich fuel mixture, hindering performance and risking engine damage...

Akrapovic Titanium Slip-On Muffler - Husqvarna/KTM 2016-2022 This Akrapovic slip-on main silencer offers more power and torque, uncompromising race look and a substantial saving in weight.  Improved torque curve combined with easily ridable peak power Made from high-grade titanium Weight savings: approx. 0.8lbs. Nano-coated...

FMF Fatty Pipe 85 2018-24 Husqvarna/GasGas/KTM 47205907000 With well over 35 years of racing experience behind it, the Fatty Gold Series pipe delivers race proven performance. The Fatty broadens and smoothes out the power curve while boosting gains throughout the entire power band, more...

FMF Fatty Pipe - Husqvarna/KTM 50 With well over 35 years of racing experience behind it, the Fatty Gold Series pipe delivers race proven performance. The Fatty broadens and smoothes out the power curve while boosting gains throughout the entire power band, more low-end,...

Powerparts Rear Wheel Stand Bobbin Adapter The set consists of retaining adapter and bushings kit, for rear wheel work stand, for lifting the motorcycle at the link fork UNIVERSAL V-ADAPTER-KIT BAJAJ