Tools

Bullet Proof Designs Oil Drain Kit Change the oil in your KTM or Husqvarna dirt bike without removing your skidplate or creating a mess.  Simply lean the bike over on to a stand or against the wall, remove your OEM drain plug from the...

Husqvarna Soft Tie Downs The Husqvarna Tie Downs feature built in soft tie loops that allow you to secure your bike without scratching the handlebars. These extra wide webbing units feature a clip hook on one end, plus high-quality friction lock fasteners with Husqvarna...

Motion Pro Chain Brush Double ended brush for cleaning chains and other components Three sided brush to clean chain rollers and side plates in one operation Long straight bristles on opposite end to clean hard to reach areas Durable nylon brush and high quality...

Grip Studs Installation Tool Grip Studs® handy tools are designed to install and remove tire or footwear studs. The power tools chuck into variable speed drills for ease of installation. Fits into cordless drills for easy installation and removal of Grip Studs.® Do not use...

Powerparts Spring Preload Adjuster Practical tool for setting preload on the shock absorber without having to remove it.

Bullet Proof Designs Threaded Bar End Inserts This is the most secure handguard fastening system available. It keeps your guards secure at all times. You tap the end of the handlebar, thread the insert at the end of the handlebar, then attach the handguards...

Motion Pro Micro Bleeders New ultra-compact, low profile design is only 11mm high installed Stainless steel body is stronger and will not corrode Easy to install, simply replace the OEM bleeder screw with the Micro Bleeder Reduces harshness caused by air build-up Allows bleeding...

Husqvarna Multi Tool Kit by Motion Pro The perfect alternative tool on the go. Conveniently packaged in a small bag you can use the tool for the following fittings: 14, 12, 10, 8mm hex sockets 6, 8, 13mm socket Inserts for flat and Phillips...

Husqvarna Lift Bike Stand Available in two different heights Maximum load: 150kg

Motion Pro Valve Core Remover Allows for easy removal and installation of standard valve cores in tubed or tubeless valve stems (Schrader valve) Perfect tool pack accessory

AKT Clutch Cover Funnel This clutch cover funnel is perfect for everyone with an Austrian model bike. Don't continue to make a mess pouring engine oil all over your clutch cover every time you do an oil change, just grab this funnel! It threads...

Husqvarna Torque Wrench Set High-quality, adjustable torque wrench with the following features: Adjustable torque 2-25 NM Spoke wrench in sizes 5.65 and 6.95 mm Push on 1/4" ratchet 8,10,13 mm sockets and T15 Torx bit included 00029996500

Maxima Quick 2 Mix Ratio Bottle Oil/Gas ratio mixing bottle Easy calibration; accurately mix ratios from 24:1 to 100:1 Durable polypropylene; accurate, convenient, easy and compact

Risk Racing Blue Seal Doctor This clever tool is a must for every motorcycle toolbox. With it, you can remove dirt from your fork seals effortlessly. No matter whether it's in the garage or directly at the racetrack. This tool extends the life of...

Motion Pro Fork Seal Bullet Tools Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation Eliminates the need to wrap the fork tube with tape Fitment size is marked on each bullet for easy identification

AKT Fat Straps Finally - straps made specifically for dirtbikes No more crushing your front forks Currently fits all stock footpegs of top brand dirtbikes Easily adaptable to new locations and configurations Features an e-track clip for quick, easy, and universal install 2-inch wide...

Bolt Euro Style Track Pack 50 Piece Incredibly popular among KTM riders, this 50-piece kit has the KTM factory style hardware that riders need! Includes M6 & M8 dimpled flange bolts, hard-to-find shroud screws, concave washers, Brembo style brake pin clips, torqs hardware, and...

Motion Pro Ringer Fork Seal Driver Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use No more worrying about...

Motion Pro 50mm Fork Cap Wrench 50 mm, 6 point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM’s 12 mm slot for holding the damper rod for removing...

Motion Pro Heavy-Duty Spring Hook Used to remove exhaust pipe springs, seat or tank holding springs, cotter pins, sidestand springs and other parts

Bolt Euro Style Pro Pack 145 Piece Only aftermarket company to offer hardware for late model KTM, Husaberg, and Husqvarna bikes in factory style and finish. Includes over 145 pieces of M6 and M8 dimpled flange bolts, concave washers, carb screws, shroud screws, sprocket bolts,...

Husqvarna Toolbox Large 60-piece, 3/8" tool box in blue with high-quality, chrome-vanadium tools. With the Husqvarna Large Toolbox small jobs can be completed quickly and reliably. Whether you're removing plastics or changing the oil, you'll definitely find the right tool here. The tool box...

Motion Pro Bead Buddy 2 New and improved design of the original Bead Buddy® Durable 6061 aluminum with blue anodized finish and laser engraved logo A must for installing Bib Mousse tubes Used to push the tire bead down into the drop center of...

Motion Pro Sealmate Fork Seal Cleaner Easy way to keep your fork seals clean and debris free Extracts dirt and debris trapped between fork seal and tube Will work on conventional and upside down forks

15" Tire Iron 15 inch steel tire iron, single

OptiMate Lithium 4s Battery Charger / Maintainer OptiMate Lithium 4s 0.8A, the essential battery charger for the 12.8V/13.2V LiFeP04 / LFP in your off-road, moto-cross or race motorcycle – Ultimate protection for your high performance Lithium battery. OptiMate Lithium is recommended by Honda, Yamaha, Kawasaki,...

Nihilo Concepts TPI Idle Screw  The Nihilo Concepts aluminum one piece Idle Screw for KTM Tpi and Husqvarna-i  models allows you to easily adjust your fuel injection idle with your fingers, no tools needed. This idle screw actually enables you to correctly adjust the...

Risk Racing Seal Doctor Black  This clever tool is a must for every motorcycle toolbox. With it, you can remove dirt from your fork seals effortlessly. No matter whether it's in the garage or directly at the racetrack. this tool extends the life of your...

Matrix Concepts C1 Steel Stand Made from 1010 Carbon Steel tubing. Extra wide 10" X 10" top. Thick removable / replaceable top pad. Aircraft quality tig welding. Anti rock design. Thick durable powder coated finish.

Motion Pro WP Compression Bolt Removal Tool Fits 2007 through 2017 KTM models with WP 4860 MXMA CC forks For removing and installing the compression valve assembly from the fork cap Also works for installation and removal of compression unit on RH fork on...

Matrix LS1 Lift Stand Constructed from thin wall lightweight super strong carbon steel. Developed and tested by top riders in professional racing. Very stable center post design. Works with all off road bikes. Height is 12" in down position and 15.5" in up position....

Matrix Concepts M3 Utility Can Comes complete with transportation cap and 5" long extender hose spout with 1 - 1/8" plastic fill reducer with cap. 3” extra wide fill cap or easy and quick filling. Strategically placed side handle and special unique bottom handle...

Matrix Concepts 6QT Oil Drain Container EASY TO USE TRANSLUCENT OIL DRAIN CONTAINER WITH BUILT IN FUNNEL 6 QT capacity. Made in USA Made from recycled plastic.  Low profile drain container can be used in the shop, garage or at the track.  L 15.5"...

Husqvarna Toolbox Small 38-piece, 1/4" tool box in blue with high-quality, chrome-vanadium tools. With the Husqvarna Large Toolbox small jobs can be completed quickly and reliably. Whether you're removing plastics or changing the oil, you'll definitely find the right tool here. The tool box includes:...

Motion Pro Metric T-Handle Set Durable nickel pewter finish Deep 6-point sockets Includes a vinyl storage pouch Lifetime limited warranty 4 piece: 8mm, 10mm, 12mm, 14mm 6 piece: 8mm, 10mm, 12mm, 14mm, 17mm, 19mm (recommended for Japanese bike owners) 7 piece: 8mm, 10mm, 12mm, 13mm,...

Motion Pro Sag Scale 2 New and improved version of the original Motion Pro Folding Sag Scale Can be used to check front or rear sag New swing out design is compact and fits in most tool boxes Adjustable zero set point for direct...

Motion Pro Ratchet Spark Plug Wrench Designed to fit in limited space on many water-cooled 2-stroke engines Ratchet mechanism works one way, turn over to reverse Fits standard 13/16 inch plugs

WP Fork Air Pump Indispensable tool for the perfect and individual tuning your air fork. With this high quality pump, extensively tested by Husqvarna, you can set your air fork effectively and perfectly to your needs and the current track conditions, directly on the circuit,...

UFO Fork Block System Fork block system, keep stable the bike during transportation.

DRC Air Valve Puller - Useful during tire changes and flat repairs.- Easy to pull the air valve stem through the hole on the rim.- Air valve puller head may also be used for air valve core removal.

AKT 48MM Fork Holders These fork holders are the perfect way for everyone to hold their forks without running the risk of dropping them. These are 3D printed, very durable, and we use them for almost every fork that comes through Direct Suspension. Don't...

Motion Pro Compact Chain Breaker Original Motion Pro design Fits 420 to 530 chain Will push link pin completely through link / side plate Handle folds away for easy storage Durable drive pin is heat treated for strength and wear resistance Will not work...

Matrix Concepts M64 Elite Stand *This is a special order item only. Please CONTACT US to see availability* A new milestone in motorcycle stand technology and styling. The M64's revolutionary design delivers the most durable and lightweight motorcycle stand on the market today. The plastic stand...

Husqvarna Multi Plug-In Stand Plug-in stand and fork support, combined in one unit: two tools in one save space during transport of your bike stabilizes the motorcycle during transport protects the fork shaft sealing rings and fork springs against damage, which may otherwise be caused...

Tirox 360 Degree Chain Brush Quickly loosens grit and old chain lube from chains Safe on all chains

DRC Pro Chain Tool Designed to break, press side plates and rivet most 420, 428, 520,525 and 530 standard and O-ring chains.  Light weght aluminum body.  Straight forward part construction.  Conveniently stores headpin in the handle. Fits nicely in the tool box and no...

Antigravity Micro-Start Sport Jump Starter The NEW Micro-Start SPORT is one of the smallest lithium-ion Jump-Starter / Personal Power Supply (PPS) units available. It’s also the most compact Micro-Start Kit. Another feature distinguishing SPORT is its ability to recharge via any Micro-USB connection, such as found on...

Nihilo Concepts Separate Start/Stop Conversion Kit 2023+ The Nihilo Concepts Separate Start / Stop Conversion Kit is designed to provide an alternative to the new combination switch on the new bikes. The combo switch does not have a user-friendly feel, and many cross country...

Husqvarna Bobbins Support Adapter For Rear Wheel Stand Secure stand for your bike Made of high-strength aluminum Make Model Years Husqvarna 701 Enduro/Supermoto 2017+

Nihilo Concepts KTM/Husqvarna/GasGas 65 Jet Kit Fitment: 2009-2022 KTM/Husqvarna 65 + 2021-2022 GasGas 65 Nihilo Concepts recommended Jet Kit These are real jets without the numbers being ground off we keep the jet numbers intact so you can adjust according to the conditions you...